|
Brackett Green Dual Flow
Band Screens are designed for installation on raw water
intakes where a continuously efficient means of removing
floating and suspended solids is required, in order
to protect pumps, heat exchangers and other critical
equipment. Fitted with mesh aperture sizes from 2mm
to 10mm, these dual flow band screens can be installed as a single
system or as part of a two or three stage system.
Economical
Where the difference between
high and low water and the location of deck level
dictate a comparatively deep chamber, the Brackett
Green Dual Flow Band Screen is often the most economical
screen. Applications include screening fresh and
sea water intakes for nuclear and thermal power
stations, refineries, petrochemical and aluminum
plants and steel works: plus first stage treatment
and pump protection at water treatment and desalination
plants.
Endless
Band
The Brackett Green Dual Flow
Band Screen has an endless band of screening panels
through which the water passes, from the outside
inwards. Debris collected on the mesh panels is
raised to deck level and removed by back washing.
Main chains, supported by two sprockets above
deck, carry the screening band. Drive is provided
by an electric motor through a shaft-mounted reduction
worm gear unit. Underwater, the main chains run
in guide sections fitted with wearing. strips,
located in a self-supporting fabricated frame.
Specifically designed
Brackett Green Dual Flow Band Screens
are purpose designed for each individual application,
and can incorporate specific features to suit the operating
and site conditions
Ancillary equipment
If required Brackett Green can supply
all the plant needed for a complete screening installation.
Contact our sales
team to discuss your requirements.
Download Video
|
|
